Free shipping on orders over $199!*
Ice Away Water Deicer for ponds and lake docks delivering high-performance ice prevention with a sealed, maintenance-free motor.
Load video: IceAway Dock De-icer | Protect Marinas and Boats
Load video:
Ice Away Water Deicer for ponds and lake docks delivering high-performance ice prevention with a sealed, maintenance-free motor.

IceAway Dock De-icer | Protect Marinas and Boats

Help limit ice around docks, pilings, boat lifts, and slips with water circulation.

$895.00
Voltage: 115V
Power Cord Length: 25 Feet

Need a 3-Phase or ask a question? Contact a Pond Expert

Why You'll Love It

  • Practical option when removing a dock is not realistic
  • Sealed & Water Cooled | Optional Conversion Kit to Surface Aerator
  • High Flow With No Motor Oil to Maintain
Overview ▾

Localized Winter Protection for Docks and Waterfront Structures

IceAway is a 1/2 HP suspended pond and dock de-icer for property owners who leave in docks, pilings, boat lifts, slips, and other defined waterfront structures in the water through winter. It provides a practical option when removing those structures is not realistic.

The foul-resistant propeller turns at 3,450 RPM and moves water through a cone diffuser. Instead of using a heating element, IceAway brings warmer subsurface water upward and directs it toward the area being protected to help limit ice formation and pressure.

IceAway is intended for localized ice management, not for clearing an entire pond or lake. The size and shape of the open water may vary with placement, installation depth, water depth, dock layout, current, air temperature, available heat in the water, and the length and severity of the freeze.

Key Benefits ▾

Built to Stay In & Runs Without Oil Related Upkeep

  • Protect the structures that stay in the water: Direct circulation around docks, pilings, boat lifts, slips, and other defined waterfront assets instead of trying to open the entire pond.
  • Cone directed circulation: The motor, foul-resistant propeller, and cone diffuser work together to control the direction of the discharge rather than relying on pushing water volume alone.
  • Sealed, water-cooled motor: Water cools the motor so there is no oil reservoir to monitor and maintain. Thus removing any risk of leak into the water.
  • Supports winter gas exchange: Under suitable pond conditions, the open water area can support contact between the water and atmosphere. Allowing gases to be released and exchanged that would otherwise become trapped.
  • Ready for suspended installation: Two 10-foot suspension ropes are included for positioning the unit at the required depth and angle.
Applications ▾

Use IceAway Where Winter Pressure Threatens a Defined Structure

Best suited for: Docks that remain installed through winter, pilings, boat lifts, slips, marinas, and other targeted waterfront areas where warmer water can be directed toward the structure.

Plan placement around the site: Installation depth, operating angle, water depth, structure layout, and local freeze conditions affect the circulation pattern. Large footprints, shallow water, unusual layouts, or severe freezes may require more than one unit or a different placement plan.

Not designed for: Clearing an entire pond or lake, or to create safe recreational ice because moving water creates thin and unstable ice around the edges of the open water area.

Tech Specs ▾

Choose the Correct Voltage and Cord Length Before Ordering

Both voltage configurations provide the same rated circulation. The 230V configuration draws fewer amps, but voltage alone does not determine whether a power run is suitable. Confirm the electrical service and measure the actual cable route before choosing a cord length.

Motor Output 1/2 HP, nominally 0.37 kW
Motor Type Sealed 4-inch submersible motor
Electrical Design Single phase, two wire
Motor Speed 3,450 RPM
Rated Flow 500 GPM
115V Configuration 8.1 max amps, 890 max watts
230V Configuration 4.3 max amps, 845 max watts
Power-Cord Options 25, 50, 100, 150, 200, or 250 foot options
Cooling and Lubrication Water cooled and water lubricated; no motor oil
Flow Control Angled cone diffuser
Propeller Foul-resistant propeller
Included Mounting Equipment Two 10-foot suspension ropes
Certifications UL Recognized and CSA Certified
Country of Origin Made in USA
Warranty Three years

Electrical planning: Confirm available voltage, circuit capacity, connections, and required groundfault protection before installation. Consult an electrician when the conductor sizing, or voltage drop planning is uncertain.

Maintenance and operation: Periodically inspect the power cord, propeller, cone diffuser, and suspension ropes for weed buildup, physical damage, or wear. Disconnect power before touching, inspecting, or repositioning the unit. The motor must remain properly submerged while operating.

Vendor: Outdoor Water Solutions

SKU: 92IA511525
Ice Away Water Deicer for ponds and lake docks delivering high-performance ice prevention with a sealed, maintenance-free motor.

IceAway Dock De-icer | Protect Marinas and Boats

$895.00

See the difference

Images show an IceAway creating an open water area around the dock structure during freezing conditions.

Before

IceAway Dock De-icer | Protect Marinas and Boats before view

After

IceAway Dock De-icer | Protect Marinas and Boats after view

Zero Oil. Zero Seal Leaks. 100% Safe for Your Water.

The IceAway uses a hermetically sealed motor, 100% water-cooled. By using surrounding water to naturally cool the unit and lubricate internal bearings, it eliminates internal oil entirely; guaranteeing zero risk of hazardous spills around your dock, marina slip, or private fishery.
IceAway Dock De-icer | Protect Marinas and Boats

Patented Cone Diffuser

The included cone directs the unit’s 500 GPM flow outward toward the localized protection area instead of allowing the water to remain concentrated directly above the unit. It is designed to work with IceAway’s 3,450 RPM circulation system.

View Product >

Two Voltage Options

Both voltage configurations move the same 500 GPM. The 115V model draws 8.1 full-load amps, while the 230V model draws 4.3 full-load amps. Choose the voltage that matches the electrical service at the installation site.

Rope Mounting Points

Two included 10-foot suspension ropes attach at these points. They allow IceAway to be suspended beside a dock, piling, lift, or slip and aimed toward the area that needs protection.

Foul-resistant propeller

The rigid propeller turns at 3,450 RPM to help move 500 GPM while reducing flex and weed wrapping. The design is foul-resistant rather than debris-proof, so the propeller should still be inspected periodically.

View Product >

Sand Slinger

The stainless steel sand slinger helps direct abrasive particles away from the motor’s entry points, reducing exposure of internal components to suspended sand.

Laser Welded Stator Assembly

Laser-welded construction helps seal the stator assembly against water intrusion, protecting the motor’s internal electrical components during submerged operation.

Class F Insulation

Class F magnet wire and insulation are built to tolerate elevated operating temperatures within the motor system.

304L Stainless Steel Shell

The 304L stainless steel exterior helps the submerged motor resist rust and corrosion during underwater service.

Hardened Drive Shaft

The 17-4 PH hardened stainless steel shaft transfers power from the motor to the propeller while resisting wear and corrosion.

Stainless Steel End Bells

Stainless steel upper and lower end bells support and close the motor housing while adding corrosion resistance at both ends of the assembly.

Kingsbury Style Thrust Bearing

The Kingsbury-style thrust bearing carries the axial load created by the rotating assembly. The 1/2 HP motor configuration has a 700-pound internal thrust-load rating. This is a bearing rating, not a claim that IceAway produces 700 pounds of water thrust.
Outdoor Water Solutions

3,450 RPM Kinetic Velocity: Why Speed Beats Raw GPM.

Raw flow ratings can be misleading. Conventional low RPM units push water at slow speeds. When temperatures plunge into sub-zeros, slow-moving surface water rapidly loses heat, allowing surface ice and slush to form right back over the current.

The IceAway operates at 3,450 RPM which delivers at least twice the rotational speed of traditional models. Paired with our patented directional diffuser cone, 1972 patent cone diffuser geometry derived from fluid dynamics. When effectively used, it stops ice from locking onto wooden pilings, aluminum dock frames, or boats and more.

Sizing & Coverage Guide

Real-World Sizing & Placement Guide.

How to position your IceAway for maximum ice-melting radius.

Operating Depth Expected Open Water Diameter Target Protection Zone
3 to 4 Feet 24–32 Feet Shallow swim platforms, single boat lifts, and small shoreline bulkheads
5 to 6 Feet (Ideal) 40–48 Feet Two-slip residential docks, pontoon berths, and private pond corners
7 to 8 Feet 55–60 Feet Commercial marina walkways, wide boathouses, and open-water fish refuges

Actual open-water coverage can vary with temperature, ice thickness, water movement, installation angle, and local conditions.

Outdoor Water Solutions
Surface Pond Aerator for residential ponds and lakes – Aquarian Pro floating aerator, 1/2–1.5 HP, for oxygenation, algae control, and fish health.

Stop Storing Your Investment for 8 Months of the Year.

Standard dock de-icers are a single-season expense. You spend thousands of dollars for three months of ice defense, only to haul a heavy machine out of the water to sit on a dusty garage shelf all spring and summer.

The IceAway is engineered as a modular 365 day platform:

  • Winter Defense: Suspend the motor from dock cleats or pilings to establish a continuous ice free moat around valuable marine assets.
  • Summer Aeration: When spring arrives, snap on the OWS Float Conversion Kit. Within 15 minutes, your de-icer converts into an Aquarian Pro Surface Aerator, generating an oxygen rich surface plume that de-gasses odors, controls algae blooms, and digests bottom muck all summer long.
 See Surface Aerator Kit Here

Compatible parts and accessories

Products shown here are pulled from this product's confirmed compatibility list.

Black propeller on a white background

Ice Away Propeller

$62.00

View accessory
Black 3D-printed object with a funnel-like top on a white background

Cone Diffuser - for Ice Away / Aquarian Pro

$210.00

View accessory
OWS IceAway to Surface Aerator Conversion Kit

OWS IceAway to Surface Aerator Conversion Kit

$495.95

View accessory
OWS Surface Aerator to Deicer Conversion Kit

OWS Surface Aerator to Deicer Conversion Kit

$79.95

View accessory

Frequently asked questions

Is this unit right for my application?

It is designed for localized ice management around docks, pilings, boat lifts, slips, and defined waterfront structures. It is best suited for protecting targeted assets where seasonal structure removal is impractical. Note: It is not intended to clear an entire pond or lake body. Large footprints, shallow water, or severe arctic freezes may require multiple units.

How does it prevent ice without a heating element?

It draws warmer subsurface water upward via a high-speed propeller and redirects it outward using a patented cone diffuser. This continuous kinetic circulation stops surface ice from locking onto structures. Additionally, the open-water pocket allows for atmospheric gas exchange, which helps prevent winter fish kill in ponds.

Which voltage and cord length should I choose?

Both options deliver the exact same 500 GPM circulation.

  • 115V (8.1 Amps / 890 Watts): Best for standard residential shoreline outlets.
  • 230V (4.3 Amps / 845 Watts): Draws half the amperage, making it ideal for long power runs without severe voltage drop.
  • Cord Lengths: Available in 25 ft, 50 ft, or 100 ft submersible-grade options.

How should it be positioned, and what area does it cover?

Suspend the unit 4 to 5 feet below the surface using the included 10-foot ropes, angling the directional cone toward the structure needing protection. Coverage expands roughly 8 feet in diameter for every 1 foot of operating depth:

  • 4 ft Depth: ~32 ft open-water diameter (ideal for single slips and bulkheads)
  • 5 ft Depth: ~40 ft open-water diameter (ideal for double slips and marina walkways)

What are the primary technical specifications?
  • Motor & Power: 1/2 HP (0.37 kW), 3,450 RPM, sealed 4-inch submersible motor
  • Flow Rate: 500 GPM continuous circulation
  • Cooling & Eco-Safety: 100% water-cooled and lubricated (zero internal motor oil)
  • Hardware: Directional cone diffuser, foul-resistant 2-blade prop, (2) 10-ft suspension lines
  • Origin & Warranty: Made in USA, UL Recognized, CSA Certified, 3-Year Warranty

What maintenance and safety considerations apply?
  • Maintenance: The oil-free motor requires no fluid changes. Periodically check the cord, prop, and ropes for physical wear or weed wrapping. Always disconnect power before touching or servicing the unit.
  • Safety: Moving water creates thin, unstable ice surrounding the open perimeter. Clearly mark the area and keep people, pets, and vehicles away.

Real help before you order

Still deciding on the right setup?

Tell our pond team about the water, power source, placement, and protection goal. We can help you check the configuration before purchase.

Ask a Pond Expert

Call Us ( M-F | 8am - 5pm CST )

+1 -866 -471 - 1614 (toll-free)

General Inquiry?

Fill out a contact form

Address

1856 Fed-X Dr, Springdale, AR 72764