2-Way Selector Valve 1/2″
The 2-Way Selector Valve 1/2″ regulates CFM from the compressor to your diffuser(s). These valves are recommended when using multiple Airstones diffusers. It can also work with a combination of Airstones and water pumps. When using a variety of multiple Airstones or Rubber Membrane Disk Diffusers, it is essential to have a 2-Way Selector Valve to make sure your air is flowing to the location you want it to. This 2-Way Selector Valve is designed to work with an airline that is 1/2-inch diameter. Half inch airline is the perfect size for windmill aeration. It allows plenty of air to move from your windmill compressor to your Airstone and provides proper aeration for your pond or lake.
Why Use Windmill Aeration
Windmill aeration is ideal for a location where solar aeration is not practical or running electric is not realistic. Our windmill aeration systems are suitable for any location that is open. The massive 73″ head is designed to turn in even low wind situations. Plus, the front dome and blade have been recently redesigned for better airflow. This keeps your pond or lake aerated even on those balmy summer days. Standing an impressive 27′, the windmill can capture winds you don’t even notice. In other words, at 27′, you will notice tree leaves rustling in the breeze even when you cannot feel it at ground level.
Plus, you never have to worry about the wind blowing too hard. Our self-governing head protects against over-turning caused by high winds. Our compressors have you covered with a full 5-year warranty on cams and bearings. When you install a windmill aeration system, you can put mother nature to work for you and allow her to aerate your pond! A windmill aeration system helps keep your pond clean and helps ensures your fish population is healthy.