Description

Font`N-Aire Ready 1HP

The Font`N-Aire Ready 1HP Ready fountain line has four major components:

FLOAT

• constructed of rugged polyethylene molded plastic with UV inhibitors and filled with nonhygroscopic pressure molded polystyrene foam.

POWER DRIVE ASSEMBLY

• mounting structure (drive structure assembly), pump/propeller, nozzle and motor.

ELECTRICAL SERVICE CABLE ASSEMBLY

• 100’ (standard) of AWG# 12/4 submersible cable and a submersible quick-disconnect connector, which plugs into the fountain.

CONTROLS for the Font`N-Aire Ready 1HP

• 24-hour time clock with multiple off/on trippers, a Franklin Electric start and run QD capacitor box and an inline ELCI ground fault protector with a standard 230 volt, 15 amp plug. All of the components are prewired and mounted on a 16” x 14” plate.

In addition, Outdoor Water Solutions exclusively uses the Franklin Electric 600M submersible motor on all fountain lines. Above all, the water cooled and lubricated motor is specially designed for lake and pond fountain applications and is environmentally safe.

What makes the Font`N-Aire Ready 1HP unique?

The CENTRIFUGAL PUMP DISPLAY FOUNTAIN’s unique center discharge pump design keeps the shaft of the submersible motor and the discharge in a vertical position. This allows the entire weight of the fountain to remain in the center of the float. This also makes the fountain easy to install and remove from the float without special mounting brackets or hardware. Our centrifugal pump design produces high pressure, which creates terrific heights and displays using far less horsepower compared to other fountain equipment. This fountain should only be used for aesthetics because the volume of water being pumped into the air is not enough to be considered an aerating device by oxygen transfer testing and Outdoor Water Solutions standards.

A floating pond fountain is a beautiful addition to any pond. However, did you know that not all floating fountains are made the same? In other words, you have to choose a floating fountain that will work for your type of pond, lake, or any other water feature. Fountains can be made to aerate your waters or can also work as a simple compliment to your pond. You’ll be able to find a range of sizes and aeration power to accommodate the layout of your pond.